| Quantity: | |
|---|---|
NI10-Q25 / NI15-Q30 / TL-W / TL-Q / TL-N / PS / PL / SN / PSN
GWIEC
These compact block and low-profile sensors detect metal when a cylindrical mounting is unsuitable. Compare NI-Q, TL-W, TL-Q, TL-N and PSN housing forms independently.
| Outward appearance code | Square housing | 10×5.5×21 | 8×6×23 | ||
| Installation | Non-flush | Non-flush | Non-flush | Non-flush | |
| Detection distance | 10 mm ±10% | 15 mm ±10% | 1.5 mm ±10% | 3 mm ±10% | |
| Product photograph | View original image NI10-Q25 product photograph  | View original image NI15-Q30 product photograph  | View original image TL-W1R5 product photograph  | View original image TL-W3 product photograph | |
| Output | NPN normally open | Ni10-Q25-AN6X | Ni15-Q30-AN6X | TL-W1R5MC1 | TL-W3MC1 |
| NPN normally closed | Ni10-Q25-RN6X | Ni15-Q30-RN6X | — | TL-W3MC2 | |
| NPN normally open + closed | — | — | — | — | |
| Output | PNP normally open | Ni10-Q25-AP6X | Ni15-Q30-AP6X | — | — |
| PNP normally closed | Ni10-Q25-RP6X | Ni15-Q30-RP6X | — | — | |
| PNP normally open + closed | — | — | — | — | |
| Output | DC two-wire normally open | Ni10-Q25-AD4X | Ni15-Q30-AD4X | — | — |
| DC two-wire normally closed | Ni10-Q25-RD4X | Ni15-Q30-RD4X | — | — | |
| Output | AC two-wire normally open | Ni10-Q25-AZ3X | Ni15-Q30-AZ3X | — | — |
| AC two-wire normally closed | Ni10-Q25-RZ3X | Ni15-Q30-RZ3X | — | — | |
| AC two-wire normally open + closed | — | — | — | — | |
| Technical parameters | |||||
| Set distance | 0–8 mm | 0–13 mm | 0–1.2 mm | 0–2.1 mm | |
| Standard target | Steel 30 x 30 x 1 mm | Steel 50 x 50 x 1 mm | Steel 8 x 8 x 1 mm | Steel 12 x 12 x 1 mm | |
| Supply voltage | 6–36 V DC; 90–250 V AC for AC variants | 6–36 V DC; 90–250 V AC for AC variants | 10–30 V DC | 10–30 V DC | |
| Switching point tolerance | ±10% | ±10% | ±10% | ±10% | |
| Load / output requirement | <200 mA | <300 mA | <100 mA | <100 mA | |
| Voltage drop | <2.5 V | <2.5 V | <2.5 V | <2.5 V | |
| Consumption current | <10 mA | <10 mA | <10 mA | <10 mA | |
| Hysteresis | 1–20% | 1–20% | 1–20% | 1–20% | |
| Repeatability | <3% | <3% | <3% | <3% | |
| Switching frequency | 500 Hz DC; 25 Hz AC for AC variants | 500 Hz DC; 25 Hz AC for AC variants | 1000 Hz DC | 600 Hz DC | |
| Indicator | Red LED | Red LED | Red LED | Red LED | |
| Reverse polarity protection | Yes | Yes | Yes | Yes | |
| Surge protection | Yes | Yes | Yes | Yes | |
| Short circuit protection | Yes | Yes | Not specified | Not specified | |
| Ambient temperature | −25 to +70 °C | −25 to +70 °C | −25 to +70 °C | −25 to +70 °C | |
| Ambient humidity | 35–95% RH | 35–95% RH | 35–95% RH | 35–95% RH | |
| Protection rating | IP67 | IP67 | IP67 | IP67 | |
| Housing material | ABS | ABS | ABS | ABS | |
| Connection | 2 m PUR cable; M12 connector option shown | 2 m PUR cable; M12 connector option shown | 2 m PUR cable | 2 m PUR cable | |
| Catalog marking | CE symbol shown in catalog | CE symbol shown in catalog | CE symbol shown in catalog | CE symbol shown in catalog | |
| Engineering drawing Click to enlarge | View original image NI-Q / TL-W engineering drawing  | View original image NI-Q / TL-W engineering drawing  | |||
| Outward appearance code | 17×17×28 | 25×25×38 | 30×30×52 | 40×40×52 | 18×18×36 | |
| Installation | Non-flush | Non-flush | Non-flush | Non-flush | Non-flush | |
| Detection distance | 5 mm ±10% | 5 mm ±10% | 10 mm ±10% | 20 mm ±10% | 5 mm ±10% | |
| Product photograph | View original image TL-Q5 product photograph  | View original image TL-N5 product photograph  | View original image TL-N10 product photograph  | View original image TL-N20 product photograph  | View original image PSN17 product photograph  | |
| Output | NPN normally open | TL-Q5MC1-Z | TL-N5ME1 | TL-N10ME1 | TL-N20ME1 | PSN17-5DN |
| NPN normally closed | TL-Q5MC2-Z | TL-N5ME2 | TL-N10ME2 | TL-N20ME2 | PSN17-5DP | |
| NPN normally open + closed | — | — | — | — | — | |
| Output | PNP normally open | TL-Q5MB1-Z | TL-N5MF1 | TL-N10MB1 | TL-N20MB1 | PSN17-5DN2 |
| PNP normally closed | TL-Q5MB2-Z | TL-N5MF2 | TL-N10MB2 | TL-N20MB2 | PSN17-8DN | |
| PNP normally open + closed | — | — | — | — | — | |
| Output | DC two-wire normally open | TL-Q5MD1-Z | TL-N7MD1 | TL-N12MD1 | TL-N20MD1 | PSN17-8DP |
| DC two-wire normally closed | TL-Q5MD2-Z | TL-N7MD2 | TL-N12MD2 | TL-N20MD2 | PSN17-8DN2 | |
| Output | AC two-wire normally open | TL-Q5MY1-Z | TL-N7MY1 | TL-N10MY1 | TL-N20MY1 | PSNT17-5DO |
| AC two-wire normally closed | TL-Q5MY2-Z | TL-N7MY2 | TL-N10MY2 | TL-N20MY2 | PSNT17-5DC | |
| AC two-wire normally open + closed | — | — | — | — | — | |
| Technical parameters | ||||||
| Set distance | 0–4 mm | 0–4 mm | 0–8 mm | 0–18 mm | 0–4 mm | |
| Standard target | Steel 18 x 18 x 1 mm | Steel 30 x 30 x 1 mm | Steel 45 x 45 x 1 mm | Steel 50 x 50 x 1 mm | Steel 18 x 18 x 1 mm | |
| Supply voltage | 6–36 V DC; 90–250 V AC for AC variants | 6–36 V DC; 90–250 V AC for AC variants | 6–36 V DC; 90–250 V AC for AC variants | 6–36 V DC; 90–250 V AC for AC variants | 6–36 V DC; 90–250 V AC for AC variants | |
| Switching point tolerance | ±10% | ±10% | ±10% | ±10% | ±10% | |
| Load / output requirement | <300 mA | <300 mA | <300 mA | <300 mA | <300 mA | |
| Voltage drop | <2.5 V | <2.5 V | <2.5 V | <2.5 V | <2.5 V | |
| Consumption current | <10 mA | <10 mA | <10 mA | <10 mA | <10 mA | |
| Hysteresis | 1–20% | 1–20% | 1–20% | 1–20% | 1–20% | |
| Repeatability | <3% | <3% | <3% | <3% | <3% | |
| Switching frequency | 200 Hz DC; 25 Hz AC for AC variants | 200 Hz DC; 25 Hz AC for AC variants | 200 Hz DC; 25 Hz AC for AC variants | 200 Hz DC; 25 Hz AC for AC variants | 200 Hz DC; 25 Hz AC for AC variants | |
| Indicator | Red LED | Red LED | Red LED | Red LED | Red LED | |
| Reverse polarity protection | Yes | Yes | Yes | Yes | Yes | |
| Surge protection | Yes | Yes | Yes | Yes | Yes | |
| Short circuit protection | Yes | Yes | Yes | Yes | Yes | |
| Ambient temperature | −25 to +70 °C | −25 to +70 °C | −25 to +70 °C | −25 to +70 °C | −25 to +70 °C | |
| Ambient humidity | 35–95% RH | 35–95% RH | 35–95% RH | 35–95% RH | 35–95% RH | |
| Protection rating | IP67 | IP67 | IP67 | IP67 | IP67 | |
| Housing material | ABS | ABS | ABS | ABS | ABS | |
| Connection | 2 m PUR cable | 2 m PUR cable | 2 m PUR cable | 2 m PUR cable | 2 m PUR cable | |
| Catalog marking | CE symbol shown in catalog | CE symbol shown in catalog | CE symbol shown in catalog | CE symbol shown in catalog | CE symbol shown in catalog | |
| Engineering drawing Click to enlarge | View original image TL-Q / TL-N / PSN17 engineering drawing  | View original image TL-Q / TL-N / PSN17 engineering drawing  | View original image TL-Q / TL-N / PSN17 engineering drawing  | View original image TL-Q / TL-N / PSN17 engineering drawing  | View original image TL-Q / TL-N / PSN17 engineering drawing  | |
| Outward appearance code | 17×17×28 | 17×17×35 | |||
| Installation | Non-flush | Non-flush | Non-flush | Non-flush | |
| Detection distance | 5 mm ±10% | 8 mm ±10% | 5 mm ±10% | 8 mm ±10% | |
| Product photograph | View original image PS-05 product photograph  | View original image PS-08 product photograph | View original image PL-05 product photograph  | View original image PL-08 product photograph | |
| Output | NPN normally open | PS-05N | PS-08N | PL-05N | PL-08N |
| NPN normally closed | PS-05P | PS-08P | PL-05P | PL-08P | |
| NPN normally open + closed | PS-05S | PS-08S | PL-05S | PL-08S | |
| Output | PNP normally open | — | — | — | — |
| PNP normally closed | — | — | — | — | |
| PNP normally open + closed | — | — | — | — | |
| Output | DC two-wire normally open | — | — | — | — |
| DC two-wire normally closed | — | — | — | — | |
| Output | AC two-wire normally open | — | — | PL-05AO | — |
| AC two-wire normally closed | — | — | PL-05AC | — | |
| AC two-wire normally open + closed | — | — | — | — | |
| Technical parameters | |||||
| Set distance | 0–4 mm | 0–7 mm | 0–4 mm | 0–7 mm | |
| Standard target | Steel 18 x 18 x 1 mm | Steel 30 x 30 x 1 mm | Steel 18 x 18 x 1 mm | Steel 30 x 30 x 1 mm | |
| Supply voltage | 6–36 V DC; 90–250 V AC for AC variants | 6–36 V DC; 90–250 V AC for AC variants | 6–36 V DC; 90–250 V AC for AC variants | 6–36 V DC; 90–250 V AC for AC variants | |
| Switching point tolerance | ±10% | ±10% | ±10% | ±10% | |
| Load / output requirement | <300 mA | <300 mA | <300 mA | <300 mA | |
| Voltage drop | <2.5 V | <2.5 V | <2.5 V | <2.5 V | |
| Consumption current | <10 mA | <10 mA | <10 mA | <10 mA | |
| Hysteresis | 1–20% | 1–20% | 1–20% | 1–20% | |
| Repeatability | <3% | <3% | <3% | <3% | |
| Switching frequency | 200 Hz DC; 25 Hz AC for AC variants | 200 Hz DC; 25 Hz AC for AC variants | 200 Hz DC; 25 Hz AC for AC variants | 200 Hz DC; 25 Hz AC for AC variants | |
| Indicator | Red LED | Red LED | Red LED | Red LED | |
| Reverse polarity protection | Yes | Yes | Yes | Yes | |
| Surge protection | Yes | Yes | Yes | Yes | |
| Short circuit protection | Yes | Yes | Yes | Yes | |
| Ambient temperature | −25 to +70 °C | −25 to +70 °C | −25 to +70 °C | −25 to +70 °C | |
| Ambient humidity | 35–95% RH | 35–95% RH | 35–95% RH | 35–95% RH | |
| Protection rating | IP67 | IP67 | IP67 | IP67 | |
| Housing material | ABS | ABS | ABS | ABS | |
| Connection | 2 m PUR cable | 2 m PUR cable | 2 m PUR cable | 2 m PUR cable | |
| Catalog marking | CE symbol shown in catalog | CE symbol shown in catalog | CE symbol shown in catalog | CE symbol shown in catalog | |
| Engineering drawing Click to enlarge | View original image PS / PL engineering drawing  | View original image PS / PL engineering drawing  | |||
| Outward appearance code | 18×18×36 | 12×12×45 | 25×25×39 | |
| Installation | Non-flush | Non-flush | Non-flush | |
| Detection distance | 5 mm ±10% | 4 mm ±10% | 5 mm ±10% | |
| Product photograph | View original image SN04 product photograph  | View original image PS12 product photograph  | View original image PSN25 product photograph  | |
| Output | NPN normally open | SN04-N | PS12-4DN | PSN25-5DN |
| NPN normally closed | SN04-N2 | PS12-4DP | PSN25-5DP | |
| NPN normally open + closed | — | — | — | |
| Output | PNP normally open | SN04-P | PS12-4DN2 | PSN25-5DN2 |
| PNP normally closed | SN04-P2 | PS12-4DNU | PSN25-5DP2 | |
| PNP normally open + closed | — | — | — | |
| Output | DC two-wire normally open | SN04-D | PS12-4DPU | PSN25-5AO |
| DC two-wire normally closed | SN04-D2 | PS12-4DN2U | PSN25-5AC | |
| Output | AC two-wire normally open | SN04-A | — | — |
| AC two-wire normally closed | SN04-A2 | — | — | |
| AC two-wire normally open + closed | — | — | — | |
| Technical parameters | ||||
| Set distance | 0–4 mm | 0–3.6 mm | 0–4 mm | |
| Standard target | Steel 18 x 18 x 1 mm | Steel 18 x 18 x 1 mm | Steel 30 x 30 x 1 mm | |
| Supply voltage | 6–36 V DC; 90–250 V AC for AC variants | 6–36 V DC; 90–250 V AC for AC variants | 6–36 V DC; 90–250 V AC for AC variants | |
| Switching point tolerance | ±10% | ±10% | ±10% | |
| Load / output requirement | <300 mA | <300 mA | <300 mA | |
| Voltage drop | <2.5 V | <2.5 V | <2.5 V | |
| Consumption current | <10 mA | <10 mA | <10 mA | |
| Hysteresis | 1–20% | 1–20% | 1–20% | |
| Repeatability | <3% | <3% | <3% | |
| Switching frequency | 200 Hz DC; 25 Hz AC for AC variants | 200 Hz DC; 25 Hz AC for AC variants | 200 Hz DC; 25 Hz AC for AC variants | |
| Indicator | Red LED | Red LED | Red LED | |
| Reverse polarity protection | Yes | Yes | Yes | |
| Surge protection | Yes | Yes | Yes | |
| Short circuit protection | Yes | Yes | Yes | |
| Ambient temperature | −25 to +70 °C | −25 to +70 °C | −25 to +70 °C | |
| Ambient humidity | 35–95% RH | 35–95% RH | 35–95% RH | |
| Protection rating | IP67 | IP67 | IP67 | |
| Housing material | ABS | ABS | ABS | |
| Connection | 2 m PUR cable | 2 m PUR cable | 2 m PUR cable | |
| Catalog marking | CE symbol shown in catalog | CE symbol shown in catalog | CE symbol shown in catalog | |
| Engineering drawing Click to enlarge | View original image SN04 / PS12 / PSN25 engineering drawing  | View original image SN04 / PS12 / PSN25 engineering drawing  | View original image SN04 / PS12 / PSN25 engineering drawing  | |
| Outward appearance code | 30×30×53 | 40×40×53 | ||
| Installation | Non-flush | Non-flush | Non-flush | |
| Detection distance | 10 mm ±10% | 15 mm ±10% | 20 mm ±10% | |
| Product photograph | View original image PSN30 / 10 mm product photograph  | View original image PSN30 / 15 mm product photograph | View original image PSN40 product photograph  | |
| Output | NPN normally open | PSN30-10DN | PSN30-15DN | PSN40-20DN |
| NPN normally closed | PSN30-10DP | PSN30-15DP | PSN40-20DP | |
| NPN normally open + closed | — | — | — | |
| Output | PNP normally open | PSN30-10DN2 | PSN30-15DN2 | PSN40-20DN2 |
| PNP normally closed | PSN30-10DP2 | PSN30-15DP2 | PSN40-20DP2 | |
| PNP normally open + closed | — | — | — | |
| Output | DC two-wire normally open | PSN30-10AO | PSN30-15DAO | — |
| DC two-wire normally closed | PSN30-10AC | PSN30-15DAC | — | |
| Output | AC two-wire normally open | — | — | — |
| AC two-wire normally closed | — | — | — | |
| AC two-wire normally open + closed | — | — | — | |
| Technical parameters | ||||
| Set distance | 0–8 mm | 0–13 mm | 0–17 mm | |
| Standard target | Steel 45 x 45 x 1 mm | Steel 45 x 45 x 1 mm | Steel 50 x 50 x 1 mm | |
| Supply voltage | 6–36 V DC; 90–250 V AC for AC variants | 6–36 V DC; 90–250 V AC for AC variants | 6–36 V DC; 90–250 V AC for AC variants | |
| Switching point tolerance | ±10% | ±10% | ±10% | |
| Load / output requirement | <300 mA | <300 mA | <300 mA | |
| Voltage drop | <2.5 V | <2.5 V | <2.5 V | |
| Consumption current | <10 mA | <10 mA | <10 mA | |
| Hysteresis | 1–20% | 1–20% | 1–20% | |
| Repeatability | <3% | <3% | <3% | |
| Switching frequency | 200 Hz DC; 25 Hz AC for AC variants | 200 Hz DC; 25 Hz AC for AC variants | 200 Hz DC; 25 Hz AC for AC variants | |
| Indicator | Red LED | Red LED | Red LED | |
| Reverse polarity protection | Yes | Yes | Yes | |
| Surge protection | Yes | Yes | Yes | |
| Short circuit protection | Yes | Yes | Yes | |
| Ambient temperature | −25 to +70 °C | −25 to +70 °C | −25 to +70 °C | |
| Ambient humidity | 35–95% RH | 35–95% RH | 35–95% RH | |
| Protection rating | IP67 | IP67 | IP67 | |
| Housing material | ABS | ABS | ABS | |
| Connection | 2 m PUR cable | 2 m PUR cable | 2 m PUR cable | |
| Catalog marking | CE symbol shown in catalog | CE symbol shown in catalog | CE symbol shown in catalog | |
| Engineering drawing Click to enlarge | View original image PSN30 / PSN40 engineering drawing  | View original image PSN30 / PSN40 engineering drawing  | ||
Selection note: Some PS/PL/PSN output-row labels and suffix letters do not align with the usual NPN/PNP convention; they are retained from the catalog. Confirm the wiring for the complete code. TL-W1R5 and TL-W3 specify 10–30 V DC and do not list short-circuit protection.
Values are transcribed from the GWIEC sensor catalog, pages 15–18. A dash means no model is listed in that source cell. Nominal distance and an operating/set distance are different quantities. Select the complete model, output, supply, connection and mounting dimensions together.
Click any product photograph or engineering drawing to open the original image at full size.
Compare inductive sensor families · All proximity sensor categories · Contact GWIEC for model confirmation
