| Quantity: | |
|---|---|
GSL60 / GSH / GLX-1M / GLD-2506 / GLD-2508
GWIEC
GSL60 manual pulse generators, GSH handheld pendants and GLX draw-wire encoders serve different position-control tasks. Compare their outputs and measurement forms separately; GLD couplings provide a mechanical connection accessory.
| Outward appearance code | GSL60 manual pulse encoder | GSH handheld pendant | GLX draw-wire encoder | GLD flexible coupling | |
| Product photograph | View original image GSL60 manual pulse encoder product photograph  | View original image GSH handheld pendant product photograph  | View original image GLX draw-wire encoder product photograph  | View original image GLD flexible coupling product photograph  | |
| Technical parameters | |||||
| Models | GSL60-25 / GSL60-100 | GSH-25 / GSH-100 | — | GLD-2506 / GLD-2508 | |
| Body | Ø60 mm | — | — | — | |
| Supply | 5–24 V DC | 5–24 V DC | — | — | |
| Output | E: voltage pulse; F: complementary; L: line driver | E: voltage pulse; F: complementary; L: line driver | F: complementary; L: line driver | — | |
| Pulses / revolution | 25 / 100 | 25 / 100 | 2500 / 5000 | — | |
| Channels | A, B, Z or complementary channels | — | A, B, Z or complementary channels | — | |
| Speed | 600 r/min | — | — | — | |
| Application | CNC machine tools and printing-machine fine position adjustment | CNC machine tools | Test machines and presses | — | |
| Body / shaft | — | Catalog prints Ø30 mm / Ø4 mm | — | — | |
| Multiplier | — | X1 / X10 / X100 | — | — | |
| Axis selection | — | X / Y / Z / 4 | — | — | |
| Model | — | — | GLX-1M | — | |
| Linearity | — | — | 0.05% FS | — | |
| Measuring stroke | — | — | 1 m | — | |
| Cable exit | — | — | G: side | — | |
| Length | — | — | — | 25 mm | |
| Bore | — | — | — | Ø6 mm printed in source; confirm the selected coupling | |
| Accessory | — | — | — | Wrench | |
| Matching catalog families | — | — | — | GHA38S / GHB38S / GHC38S | |
Selection note: The source provides no complete engineering drawings for the encoder families on pages 42–43. Product photos are preserved; request the drawing for the selected model. The GLD-2508 bore is not separately specified in the table and is not inferred from its suffix.
Values are transcribed from the GWIEC sensor catalog, pages 43. A dash means no model is listed in that source cell. Nominal distance and an operating/set distance are different quantities. Select the complete model, output, supply, connection and mounting dimensions together.
Click any product photograph or engineering drawing to open the original image at full size.
Compare encoder sensor families · All proximity sensor categories · Contact GWIEC for model confirmation
