| Quantity: | |
|---|---|
TCB-3080 / TCC-30120
GWIEC
TCB and TCC are large-face capacitive sensor families with 80 and 120 mm nominal catalog ratings. Compare the reference target, working distance and model-specific power supply.
| Outward appearance code | Ø140×55 | Ø210×64 | |
| Installation | Non-flush | Non-flush | |
| Detection distance | 80 mm ±10% | 120 mm ±10% | |
| Product photograph | View original image TCB / Ø140 x 55 product photograph  | View original image TCC / Ø210 x 64 product photograph  | |
| Output | NPN normally open | TCB-3080A | TCC-30120A |
| NPN normally closed | TCB-3080B | TCC-30120B | |
| NPN normally open + closed | — | — | |
| Output | PNP normally open | TCB-3080C | TCC-30120C |
| PNP normally closed | TCB-3080D | TCC-30120D | |
| PNP normally open + closed | — | — | |
| Output | DC two-wire normally open | TCB-3080AL | TCC-30120AL |
| DC two-wire normally closed | TCB-3080BL | TCC-30120BL | |
| Output | AC two-wire normally open | TCB-2080A | TCC-20120A |
| AC two-wire normally closed | TCB-2080B | TCC-20120B | |
| AC two-wire normally open + closed | — | — | |
| Technical parameters | |||
| Set distance | 0–65 mm | 0–90 mm | |
| Standard target | Steel 140 x 140 x 2 mm | Steel 210 x 210 x 2 mm | |
| Supply voltage | 6–36 V DC; 90–250 V AC for AC variants | 6–36 V DC; 90–250 V AC for AC variants | |
| Switching point tolerance | ±10% | ±10% | |
| Load / output requirement | <300 mA/<1 A | <300 mA/<1 A | |
| Voltage drop | <2.5 V | <2.5 V | |
| Consumption current | <10 mA | <10 mA | |
| Hysteresis | 1–20% | 1–20% | |
| Repeatability | <3% | <3% | |
| Switching frequency | 200 Hz DC; 25 Hz AC for AC variants | 200 Hz DC; 25 Hz AC for AC variants | |
| Indicator | Red LED | Red LED | |
| Reverse polarity protection | Yes | Yes | |
| Surge protection | Yes | Yes | |
| Short circuit protection | Yes | Yes | |
| Ambient temperature | −25 to +70 °C | −25 to +70 °C | |
| Ambient humidity | 35–95% RH | 35–95% RH | |
| Protection rating | IP67 | IP67 | |
| Housing material | ABS / glass-fiber composite (catalog) | ABS / glass-fiber composite (catalog) | |
| Connection | 2 m PUR cable | 2 m PUR cable | |
| Catalog marking | CE symbol shown in catalog | CE symbol shown in catalog | |
| Engineering drawing Click to enlarge | View original image TCB / TCC engineering drawing  | View original image TCB / TCC engineering drawing  | |
Selection note: Catalog distances use the listed steel reference targets. Detection of plastic, glass, liquid or other materials depends on the application and sensitivity setting; verify the required target with GWIEC.
Values are transcribed from the GWIEC sensor catalog, pages 23. A dash means no model is listed in that source cell. Nominal distance and an operating/set distance are different quantities. Select the complete model, output, supply, connection and mounting dimensions together.
Click any product photograph or engineering drawing to open the original image at full size.
Compare capacitive sensor families · All proximity sensor categories · Contact GWIEC for model confirmation
